Product Videos

  • 5 minute or less fluorescent tube light to LED T8 conversion with our EZ Kit
  • How to convert a TWO Ballast T8 Fluorescent Tube Light to LED T8 DOUBLE END powered Fixture
  • How to Convert Fluorescent 4 Tube Fixture to LED Fast

EZ LED T8 FROSTED glass retrofit kit fits 3 tube 4-foot light, Type-B, Double End 5000K Cool White Color

# EZ-LED-T8-FR-3-LAMP-KIT-GL-5000K

Be the first to review this product

Bulk EZ LED T8 FROSTED glass lens 3-lamp complete retrofit kit, Double End, Type-B, 4-foot 18watt, 50,000 hrs, cool white 5000K light for fluorescent T8 / T12 lamp replacement in a ballast bypass retrofit application where power is supplied to both ends of the tube and shunted sockets / tombstones are installed in the fixture.

Replace old three tube T8 fluorescent lamps with our exclusive EZ LED 18watt T8 lamp retrofit kit includes 3 x EZ T8 LED lamps, 2 x 5-wire push-in wire connectors and 1 x Retrofit Warning Label. A complete kit for super fast easy installation. Watch our installation video as a guide located in the Product Videos under the image.

Designer's Note

Brand new product, change out your T12 or T8 fluorescent lamps, remove the "energy pig" ballast completely with our 2 minute EZ Kit, simple to use LED lamp replacements. No need to replace your sockets! Unless they are so old they are crumbling and we can help you with that as well. See our video on how fast and easy this is. We have waited 6 years for this product.

Although our retrofit kit fits 99% of the fixtures out there, there is a small percentage of older T12 fixtures that look just like the one in our video but will be hard to retrofit. We recommend that you try one kit and try the lamps in the sockets before you start the process of the retrofit. Of course you will want to do that with the power turned off to the fixture. The issue is that some of the very old T12 lamp sockets and fixtures do not allow room for the length of the new T8 retrofit tube.

To be installed by licensed electrician only. Please refer to video on this page - Do not use with dimmers.

Availability: Ships in 2-Business day!

$53.50

Price as configured: $25.46

2 x
5 Wire push-in wire connector
# 5WIRE-PUSH-CONNECTOR
1 x

* Required Fields

Price as configured: $25.46

Details

Make replacing old two lamp T8 fluorescent light fixture technology with long lasting T8 LED lamp technology with our easy to install EZ two LED lamp retrofit kit.

Includes EVERYTHING you need:

  • 3 x EZ LED T8 Lamps
  • 2 x 5-wire Push-In wire connectors
  • 1 x Retrofit Warning Label

We get this question all the time.

How much brighter are the LED T8 retrofit tubes then my existing fluorescent T8 tubes?

Putting the issue on how many lumens aside for now, we thought we would do a real world test. Here is what we did. We put up just one fluorescent T8 32watt tube at 3000K in our fixture and at 4' from the fixture we measured 31 foot candles. We did the same test with the 4000K LED-T8 18watts and got a reading of 61 foot candles and with the 5000K LED-T8 18watts we got a reading of 64 foot candles. Now it is important to remember that the human eye will see the light a little different. The 5000K will give a very cool-white color that may be good for some installations. The 4000K will be a little warmer in color, and although it may not appear to be as bright, it may make the environment more pleasing. The light output on both LED tubes measures almost double to that of fluorescent tubes.

Additional Information
Warranty 90 Days
Important Note To be installed by licensed electrician only. Please refer to video on this page - Do not use with dimmers.
Bulb Wattage 18
Input Voltage 120/277VAC
Voltage Type Line Voltage
Max Lamp 3 Lamp
Lamp Base G13
Bulb Type LED T8
Bulb Length 4ft.
Application double end powered LED T8 retrofitting, 3 tube T8 fluorescent lamp replacement
Average Hours 50,000
Approvals cULus, DLC, FCC
Beam Spread (Deg.) 240 per lamp
Bulb Emit Color Cool White
Color Temperature ( K ) 5000
Lumens 2200 per lamp
Color Render Index (CRI) 80
Incandescent Equivalent Wattage 40
Length shaft 48"
Diameter (in) 1.12"
Max Overall Length (MOL) 47.72"
You may also be interested in the following product(s)
Customers Who Bought This Item Also Bought
Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

EZ LED T8 FROSTED glass retrofit kit fits 3 tube 4-foot light, Type-B, Double End 5000K Cool White Color
Bulk EZ LED T8 FROSTED glass lens 3-lamp complete retrofit kit, Double End, Type-B, 4-foot 18watt, 50,000 hrs, cool white 5000K light for fluorescent T8 / T12 lamp replacement in a ballast bypass retrofit application where power is supplied to both ends of the tube and shunted sockets / tombstones are installed in the fixture.

Replace old three tube T8 fluorescent lamps with our exclusive EZ LED 18watt T8 lamp retrofit kit includes 3 x EZ T8 LED lamps, 2 x 5-wire push-in wire connectors and 1 x Retrofit Warning Label. A complete kit for super fast easy installation. Watch our installation video as a guide located in the Product Videos under the image.

$184.69